The mining newspaper for Alaska and Canada's North

Pebble hosts 90 years of durable rhenium

Special refinery needed to recover critical superalloy metal Critical Minerals Alaska 2020 – Published October 29, 2020

Rhenium is exceptionally resistant to heat and wear, characteristics that make it a vital ingredient in superalloys used in jet and industrial gas turbine engines.

"The high-temperature properties of rhenium allow turbine engines to be designed with finer tolerances and operate at temperatures higher than those of engines constructed with other materials," the United States Geological Survey penned in a fact sheet on the critical metal. "These properties allow prolonged engine life, increased engine performance, and enhanced operating efficiency."

According to the USGS, the average rhenium abundance in the earth's crust is less than one part per billion, making it one of the rarest elements on the periodic table.

This extreme scarcity, coupled with the heat resistance this metal offers to superalloys used the jets that keep commercial and military aircraft airborne, are among the reasons the USGS places rhenium on its list of 35 minerals and metals critical to the United States.

While exceptionally rare and never found in concentrations to mine as a standalone metal, rhenium is often found clinging to molybdenum in the porphyry deposits that supply most of the world's copper. One such deposit in Southwest Alaska encompasses enough rhenium to supply America's current rhenium needs for nearly a century.

Looking for alternatives

Roughly 47,000 kilograms, or 47 metric tons, was used in the United States during 2019. While this is nearly equal to all rhenium produced globally last year, USGS says the supply-demand ratio is tipped to slight oversupply. This is due to increased recycling of jet turbine blades, which need to be replaced about every ten years, adding to global supplies

Roughly 80% of the rhenium consumed in the U.S. last year went into turbine engine components.

The turbine engines in older generation U.S. military aircraft, such as the F-15 and F-16 fighters, were made from a nickel-based superalloy containing 3% rhenium. The turbines in newer generation fighters, such as the F-22 and F-35, contain 6% rhenium.

The higher rhenium content alloys and limited supply pushed the price of rhenium to a high of US$10,600 per kilogram, or US$10.6 million per metric ton before the markets crashed in 2009.

The same restrictions on supply that drove prices skyward also prompted manufacturers to develop newer alloys that use less rhenium.

While rhenium prices have since dropped to around US$1,300/kg, the aerospace sector continues to seek out more abundant and lest costly alternatives, which has added some uncertainty to the future demand of the superalloy metal.

"The major aerospace companies ... were expected to continue testing superalloys that contain one-half the quantity of rhenium used in engine blades as currently designed, as well as testing rhenium-free alloys for other engine components," USGS penned in its 2020 Mineral Commodity Summaries report.

The federal geological survey, however said the demand for the catalyst-grade rhenium used to produce lead-free, high-octane gasoline, which accounted for about 15% of U.S. rhenium consumption last year, remains high.

In addition to jet engines and refining catalysts, rhenium lends its 5,756-degree Fahrenheit melting point and heat-stable crystalline structure to other high-temperature applications such as electrical contact points, flashbulbs, heating elements, vacuum tubes, and X-ray tubes.

To sate its appetite for rhenium, the U.S. produced around 8,400 kilograms of this critical mineral domestically during 2019. Most of the balance was imported from Chile, Germany, Kazakhstan and Canada.

World-class source

Most of the world's rhenium is produced from porphyry copper-molybdenum deposits. Molybdenite, which commonly contains between 100 and 3,000 parts per million rhenium, is the principal source of rhenium in these types of deposits.

While the overall rhenium concentrations in copper-dominant porphyry deposits tends to be low, usually less than half a gram per metric ton, the large tonnage mined from this type of deposit makes it possible to recover economically viable quantities of the critical mineral.

Pebble, a world-class porphyry copper-gold-molybdenum deposit in Alaska, hosts roughly 4.2 million kg (9.3 million lb) of rhenium in all resource categories.

According a new resource estimate published by Northern Dynasty Minerals Ltd. in August, Pebble hosts 6.5 billion metric tons of measured and indicated averaging 0.4% (57 billion lb) copper, 0.34 grams per metric ton (71 million ounces) gold, 240 parts per million (3.4 billion lb) molybdenum, 1.7 g/t (345 million oz) silver and 0.41 ppm (2.6 million kg) rhenium.

The Southwest Alaska deposit also hosts 4.5 billion metric tons of inferred resource averaging 0.25% (25 billion lb) copper, 0.25 g/t (36 million oz) gold, 226 ppm (2.2 billion lb) molybdenum, 1.2 g/t (170 million oz) silver and 0.36 ppm (1.6 million kg) rhenium.

Considering rhenium is one of the rarest stable elements on the periodic table, this is an enormous store of the critical metal. By way of comparison, the USGS calculated the total amount of rhenium in global resources at 11 million kg at the end of 2019. This means Pebble has singlehandedly bolstered the world's known rhenium resources by roughly 38%.

If developed into a mine, this world-class deposit could help supply America's rhenium needs for decades.

"It is in the United States' best interest to develop reliable and long-term domestic sources of mineral commodities like copper, gold, molybdenum, silver, rhenium and palladium – strategic metals that are critical to the country's economic, energy, military and industrial future," said Pebble Partnership CEO Tom Collier said. "It is equally important to source these minerals from jurisdictions that are known to be leaders in environmental protection, in conserving healthy fish and wildlife populations, as well as in environmental justice and human rights. That description fits Alaska to a tee and is one more reason why Pebble is poised to become one of America's leading metals producers."

Investigating Bornite

USGS believes rich stores of rhenium at Pebble could be indicative of Alaska's larger potential for this superalloy metal.

"(R)ecent delineation of the giant Pebble porphyry copper-molybdenum-gold deposit in Alaska ... suggests that there is the potential for significant rhenium resources in undiscovered porphyry copper deposits in Alaska," the USGS penned in a 2018 rhenium report.

The federal geologists also believe Bornite, a carbonate-hosted copper project in Northwest Alaska, could hosts appreciable amounts of rhenium and other critical minerals.

This deposit, situated on lands owned by NANA Regional Corp. and being advanced by Ambler Metals Inc., a 50-50 joint venture partnership between Trilogy Metals Inc. and South32 Ltd., already hosts roughly 6.4 billion lb of copper and 77 million lb of cobalt, both important metals in electric vehicles.

It is believed that Bornite may also host important concentration of rhenium, germanium, and gallium. USGS entered into a technical agreement with Trilogy to better understand the deposits potential for these critical minerals.

The USGS also hopes to extrapolate what it learns at Bornite to widen the potential of critical byproducts metals in other Alaska copper deposits.

Refining rhenium

While mines at deposits like Pebble have the potential to fill America's foreseeable critical rhenium needs for decades to come, it takes a special process at the refinery to recover a usable form of this metal from the molybdenite.

"Rhenium is recovered from gases released during the roasting of molybdenite concentrates from porphyry copper deposits and of copper sulfide ores from sediment-hosted stratabound copper deposits," the USGS explains. "During the roasting process, rhenium is oxidized and passed up a flue stack with sulfur gases. Scrubbing of the flue dusts and gases produces sulfuric acid and other fluids that contain dissolved rhenium."

Most of the rhenium sold is in the form of ammonium perrhenate, a powder that is precipitated from the solution scrubbed from the refinery flues.

Freeport-McMoran Copper & Gold's Sierrita refinery in Arizona recovers rhenium from molybdenite concentrates from the company's own mines as well as third party concentrates.

Rio Tinto's Kennecott Mine, on the other hand, sends byproduct molybdenite concentrates from its Bingham Canyon Mine in Utah to Mexico to pull out the rhenium, which is then shipped to Chile for purification.

For the U.S. to take advantage of the rich deposits of rhenium found at Pebble and other domestic deposits, additional refineries capable of recovering this critical metal will need to be developed.

"The future supply of rhenium is likely to depend largely on the capacity of the specialized processing facilities needed to recover rhenium from molybdenite concentrates," according to the USGS.

Author Bio

Shane Lasley, Publisher

Author photo

Over his more than 16 years of covering mining and mineral exploration, Shane has become renowned for his ability to report on the sector in a way that is technically sound enough to inform industry insiders while being easy to understand by a wider audience.


Reader Comments(0)