The mining newspaper for Alaska and Canada's North

Rhenium – the hot superalloy element

Alaska copper deposit hosts 40-year supply of vital jet metal

With a melting point of 5,756 degrees Fahrenheit and a heat-stable crystalline structure, rhenium is extremely resistant to both heat and wear. This durability makes it a vital element in superalloys used in jet and industrial gas turbine engines.

"The high-temperature properties of rhenium allow turbine engines to be designed with finer tolerances and operate at temperatures higher than those of engines constructed with other materials," the United States Geological Survey penned in an informational sheet on rhenium. "These properties allow prolonged engine life, increased engine performance, and enhanced operating efficiency."

While these performance enhancing properties make rhenium a vital ingredient to modern transportation, its extreme scarcity helps boost it onto the list of 35 elements critical to the United States.

According to the USGS, the average rhenium abundance in the earths crust is less than one part per billion, making it one of the rarest elements on the periodic table.

While extremely rare, economically viable concentrations of rhenium are often found associated with porphyry copper-molybdenum deposits and one such deposit in Alaska encompasses more rhenium than has been used globally for the past four decades.

Turbines drive demand

Roughly 49,000 kilograms, or 49 metric tons, of rhenium was produced from mines around the world during 2018.

Roughly 51,000 kilograms, or 51 metric tons, of this high-temp critical metal was used in the United States during 2018. While U.S. consumption alone outstripped mine output, the supply-demand ratio is tipped to slight oversupply. This is because secondary production, primarily recycling, added more than enough to meet global demand last year.

Nearly 80 percent of the rhenium consumed in the United States is used in superalloys vital to highly efficient jet turbine engines.

"The high-temperature properties of rhenium allow turbine engines to be designed with closer tolerances, thus enabling increased thrust and higher operating efficiency," the USGS explains.

The turbine engines in older generation U.S. military aircrafts, such as the F-15 and F-16 fighters, were made from a nickel-based superalloy containing 3 percent rhenium. The turbines in newer generation fighters, such as the F-22 and F-35, contain 6 percent rhenium.

The higher rhenium content alloys and limited supply pushed the price of rhenium to a high of US$10,600 per kilogram before the markets crashed in 2009.

The same restrictions on supply that drove prices skyward also prompted manufacturers to develop newer alloys that use less rhenium.

"The major aerospace companies ... were expected to continue testing superalloys that contain one-half the quantity of rhenium used in engine blades as currently designed, as well as testing rhenium-free alloys for other engine components," the USGS penned in its annual report, Mineral Commodity Summaries 2018.

The second most popular application for rhenium, accounting for about 10 percent usage, is in the production of high-octane, lead-free gasoline.

Catalysts made from platinum and rhenium improve the efficiency of refineries that make gasoline with higher octane.

Rhenium's high melting point and stability outside of a vacuum also makes it a great ingredient for filaments used in open air. Camera flashes and mass spectrometers are among the common uses of rhenium filaments.

This high melting point – coupled with good wear resistance and ability to withstand corrosion – also makes rhenium a good metal for electric contacts and heating elements.

New lower rhenium content alloys have pushed the price of this critical metal down to around US$1,750/kg during the first half of 2019.

USGS, however, sees growing demand for rhenium in the United States.

"Consumption of catalyst-grade APR (ammonium perrhenate) by the petroleum industry was expected to remain at high levels. Demand for rhenium in the aerospace industry, although more unpredictable, was expected to continue to increase," USGS inked in its 2019 minerals report.

To sate its appetite for rhenium, the U.S. produced around 8,300 metric tons of this critical mineral domestically during 2017. Most of the balance was imported from Chile, Kazakhstan, Germany, Canada, Republic of Korea and Belgium.

Four decades of rhenium

Most of the world's rhenium is produced from porphyry copper-molybdenum deposits. Molybdenite, which commonly contains between 100 and 3,000 parts per million rhenium, is the principal source of rhenium in these types of deposits.

While the overall rhenium concentrations in porphyry deposits tends to be low, usually less than 0.5 grams per metric ton, the large tonnage mined from this type of deposit makes it possible to recover economically viable quantities of the critical mineral.

The Pebble deposit in Alaska holds a particularly large store of rhenium on U.S. soil.

The Pebble deposit hosts 6.46 billion metric tons of measured and indicated resource averaging 0.4 percent (56.9 billion pounds) copper, 0.34 grams per metric ton (70.6 million ounces) gold, 240 parts per million (3.4 billion lb) molybdenum and 1.7 g/t (344.6 million oz) silver.

Calculations completed in 2011 estimates the measured and indicated resource contains roughly 0.45 g/t rhenium, which equates to around 2.9 million kilograms, or roughly US$6.4 billion, of the critical superalloy metal.

This is enough rhenium to supply the world's needs for more than four decades at 2017 consumption levels and does not account for the rhenium contained in the 4.45 billion metric tons of inferred resource outlined at Pebble.

Carbonate-hosted rhenium

USGS believes rich stores of rhenium at Pebble could be indicative of Alaska's larger potential for this superalloy metal.

"(R)ecent delineation of the giant Pebble porphyry copper-molybdenum-gold deposit in Alaska, which has estimated rhenium resources that represent more than 40 years of production at the current level of worldwide mine production, suggests that there is the potential for significant rhenium resources in undiscovered porphyry copper deposits in Alaska," the USGS penned in a 2018 rhenium report.

The federal geologists also believe Bornite, a carbonate-hosted copper project in Northwest Alaska, could hosts appreciable amounts of rhenium and other critical minerals.

This deposit, situated on lands owned by NANA Regional Corp. and being explored by Trilogy Metals Inc., already roughly 6.4 billion lb of copper and 77 million lb of cobalt, both important metals in electric vehicles.

USGS has entered into a technical agreement with Trilogy to better understand the cobalt, germanium, gallium and rhenium potential Bornite.

This agreement will contribute to an assessment of domestic sources of critical minerals and metals being carried out by USGS. The finding could also widen the potential of critical by-product in other Alaska copper deposits.

Rhenium refineries

It takes a special process at the refinery, however, to recover a usable form of rhenium from the molybdenite.

"Rhenium is recovered from gases released during the roasting of molybdenite concentrates from porphyry copper deposits and of copper sulfide ores from sediment-hosted stratabound copper deposits," the USGS explains. "During the roasting process, rhenium is oxidized and passed up a flue stack with sulfur gases. Scrubbing of the flue dusts and gases produces sulfuric acid and other fluids that contain dissolved rhenium."

Most of the rhenium sold is in the form of ammonium perrhenate, a white powder that is precipitated from the solution scrubbed from the refinery flues.

Currently, there is only one refinery in the United States set up to recover rhenium. This roaster, which is located at Freeport-McMoran Copper & Gold's Sierrita facility in Arizona, processes byproduct molybdenite concentrates from the company's own mines as well as third party concentrates.

A second refinery capable of recovering rhenium is being developed. Combined, however, these facilities would only produce around 30 percent of domestic demand.

For the United States to take advantage of the rich deposits of rhenium found at Pebble and other domestic deposits, additional refineries capable of recovering this critical metal will need to be developed.

"The future supply of rhenium is likely to depend largely on the capacity of the specialized processing facilities needed to recover rhenium from molybdenite concentrates," according to the USGS.

Author Bio

Shane Lasley, Publisher

Author photo

Over his more than 16 years of covering mining and mineral exploration, Shane has become renowned for his ability to report on the sector in a way that is technically sound enough to inform industry insiders while being easy to understand by a wider audience.

 

Reader Comments(0)