The mining newspaper for Alaska and Canada's North

Titanium – the lighter, whiter metal

From F-35 fighters to milk; a critical mineral we use every day

Titanium conjures images of the durable and lightweight metal used to build aircraft, replacement hips, high-end bicycle frames and even quality golf clubs. While its outstanding weight-to-strength ratio and corrosion resistance makes this critical metal ideal for these applications, roughly 93 percent of the world's titanium is used to impart a stark whiteness to many of the consumer goods we use every day.

"Titanium is different than most other metallic elements in that it is mined primarily to satisfy demands for a chemical product – titanium dioxide for pigment – rather than for the metal itself," the United States Geological Survey penned in a 2017 report on titanium.

Unlike many of the other 35 minerals and metals considered critical to the United States, no appreciable amounts of titanium have been mined in Alaska. There are, however, several places across the Far North state to look for this essential household and aerospace metal.

Whiter whites

Titanium dioxide has three qualities that make it an ideal material for creating whiter whites in a surprisingly wide variety of products we use today – it is white, it is safe for human consumption and it has a very high refractive index, which means it scatters light extremely well.

"Titanium dioxide has properties of whiteness, opacity, and chemical inertness that make it especially suitable for use as pigment to impart a durable white color to paints, paper, plastic, sunscreen, toothpaste, and wallboard," the USGS inked in its titanium report.

Around 69 percent of the roughly 920,000 tons of titanium dioxide used in the United States in 2018 was added to paint. In fact, most high-quality white paints you buy in the hardware store today contain "titanium white" a pigment made from this highly reflective, white material.

In addition to imparting a reflectiveness and whiteness that makes rooms appear brighter, titanium dioxide increases paint's opacity, which assists in the "one-coat cover" touted by many paint manufacturers.

There are very few replacements for titanium dioxide when it comes to pigments. Lead, which was the ingredient of choice for white paint for nearly 2,000 years, has similar whitening qualities but is seldom used in paints today because of its toxicity.

Beyond being safe enough to whiten paint, titanium dioxide is used in many of the products we put on our skin and consume – even dairy products.

Taking advantage of some of the qualities this material lends to paint, titanium dioxide is used to increase the opacity and whiteness of skim milk and cottage cheese.

Cosmetics, sunscreens, toothpaste and many other food products take advantage of the inert whitening, reflecting and opaque qualities titanium dioxide has to offer.

Because it is used in such a wide variety of products, the vast majority of us consume or use a product containing titanium dioxide every day.

Lighter, stronger metal

While we typically don't think about titanium dioxide in our toothpaste or milk, many of us are much more familiar with the bicycle frames, golf clubs, tennis rackets and goalie masks that take advantage of the lightweight strength titanium metal lends to high-performance sporting gear.

Medical implants, such as hip and knee replacements, also take advantage of titanium metal's superior strength-to-weight ratio, corrosion resistance and inertness that allows the element to be added to milk.

The aerospace industry, however, is by far the largest consumer of titanium metal.

"As the number one customer for titanium, the aerospace industry and the titanium industry are directly linked to each other economically," according to TMS Titanium, a leading supplier and distributor of titanium mill products in the United States.

When it comes to aircraft performance, the lighter the better.

While aluminum is about 60 percent lighter than titanium, it is only about half as strong, corrodes much easier and does not hold up to heat as well. Since it is important not to break- or melt-down at 20,000 feet, titanium is the metal of choice for many aircraft parts.

"Titanium metal's combination of corrosion resistance, excellent weight-to-strength ratio, and very high melting point is not found with other metals," the USGS penned in its titanium report.

For these reasons, the geological survey said there are no completely satisfactory substitutes for titanium.

In addition to being lightweight and strong on its own, titanium alloys with aluminum, iron, nickel, molybdenum, vanadium and other metals – which makes it ideal for a wide array of aircraft parts and military equipment.

The airframes, landing gear and fasteners used in many commercial and military aircraft today are made from titanium or a titanium alloy.

The ability to withstand temperatures from subzero to above 1,100 degrees Fahrenheit, also makes titanium an increasingly useful metal for jet engine parts.

According to the USGS, an estimated 80 percent of titanium metal consumed in the U.S. during 2018 was used in aerospace applications; the balance was used in armor, chemical processing, marine hardware, medical implants, power generation, and consumer and other applications.

"Countries that have considerably large military budgets, like the United States, have a high demand for titanium and consider the availability of titanium a matter of national security," said TMS Titanium.

Widely dispersed

While titanium is the ninth most abundant element in the Earth's crust, for the most part it is too widely dispersed to be economically mined. There are a few titanium minerals, however, that contain higher concentrations of this element. About 90 percent of the world's titanium is found in one such mineral, ilmenite, made up of iron and titanium oxide.

About 100,000 tons of titanium mineral concentrates were produced in the United States during 2018. This production came from mining and tailings in Florida and Georgia.

The remaining 1.1 million tons of titanium mineral concentrates used to make titanium dioxide pigment, welding rod coatings and titanium metal in the U.S. came from overseas sources.

South Africa (35 percent), Australia (27 percent), Canada (12 percent) and Mozambique (11 percent) were America's principle suppliers of titanium concentrates.

This heavy reliance on imports, coupled with the broad applications – from toothpaste to stealth fighters – are the reasons titanium ranks among the 35 minerals the USGS currently considers critical to the economy and security of the United States.

The sparse quantities of titanium mined in the United States, however, belies the amount of resource found here.

Rich deposits of this critical mineral are found along the East Coast of the United States, a region known as the eastern North America titanium province. The deposits in this province extend from New York to the Gulf of Mexico, with the bulk of the resource in this highly populated region found in heavy-mineral concentrations in beach, bar, dune, and stream sands along the Atlantic and Gulf.

In total, about 111.9 million metric tons of titanium dioxide has been identified in 20 U.S. states.

Gulf of Alaska beach sands

Alaska is not among the 20 states that report a titanium resource but that could soon change. This is because Alaska Metal Health Trust, which was granted 1 million acres of land to earn money to provide mental health care in the state, is exploring titanium enriched beach sands along the Gulf of Alaska coast.

Located about 75 miles northwest of Yakutat, this potential resource being studied by the Alaska Mental Health Trust Lands Office is known as the Icy Cape Gold and Industrial Heavy Minerals project.

The mineral-rich beach sands found at Icy Cape were first discovered in 1899. At the time, though, the main interest was gold. Up until World War II, small hand operations along this stretch of beach, previously known as the Yakataga district, produced around 15,000 ounces of gold.

The iron and titanium oxide potential of these beach sands were first sampled by the U.S. Bureau of Mines in 1962.

The best of these samples contained 7.3 pounds of titanium per ton. Most, however, were less than two lb/t titanium.

In 1995, the Bureau of Mines revisited the beach sands. This work found the Yakataga beach sands contained ilmenite and rutile, both titanium minerals; and zircon, another mineral considered critical to the United States.

"Samples from Cape Yakataga contain an average of 0.57 percent valuable heavy minerals (0.49 percent ilmenite; 0.05 percent rutile; 0.03 percent zircon), with a range of less than 0.1 to 2.9 percent in 68-120 million metric tons of sand," Jeff Foley inked in a 1995 Bureau of Mines report.

The Bureau of Mines team led by Foley estimated that less thoroughly sampled stretches of beach in the Cape Yakataga area contain roughly another 128 million metric tons of titanium enriched beach sands.

Since 2015, the Alaska Mental Health Trust has been systematically exploring this roughly 30-mile-long stretch of beach on the property now called Icy Cape. These programs have included high-resolution aeromagnetic geophysical surveys and drilling.

While a report detailing the results from this work has yet to be published, the Mental Health Trust Lands Office has reported the mineral sands being investigated include garnets and platinum, in addition to the titanium, zircon and gold previously reported. This could provide an economically interesting mix of metals and minerals, three of which are on the current list of 35 minerals the USGS deemed critical to the United States.

The Trust Lands Office said a high-resolution magnetic geophysical survey flown over Icy Cape in 2016 shows magnetic patterns consistent with its geologic and deposit models for the property. They followed this geophysical survey up with roughly 4,000 meters of drilling. While the results from the drilling have yet to be published, Trust Lands Office geologists have told Mining News that they are encouraged by the results.

In addition to investigating the heavy mineral sands on the now Icy Bay property, the Bureau of Mines also sampled the beaches in the immediate area of the town of Yakutat, which is 75 miles to the southeast.

After extensive sampling in 1962 and 1995, the Bureau of Mines calculated that a 14-mile stretch of beach at Yakutat hosts 57 million metric tons of sand averaging 3.4 percent ilmenite, zircon and rutile. This investigation also recognized the gold and platinum metals found in these beach sands but did not do enough analysis on these metals to estimate the concentration.

The federal mining bureau also investigated the Mount Fairweather area, another stretch of beach just southeast of Yakutat. Samples collected from here averaged 2.43 percent ilmenite, 0.01 percent rutile and 0.05 percent zircon.

In total, the Bureau of Mines calculated that Icy Bay, Yakutat and Mount Fairweather host 450 million to 500 million metric tons of sand in modern shoreline deposits containing 0.5 to 3 percent valuable heavy minerals. This estimate does not include the garnets, which are used for abrasives and water filtration, platinum group metals or gold.

Humble titanium discovery

Beaches are not the only place you can find titanium in Alaska. Kemuk, a prospect in Southwest Alaska hosts what could be an enormous lode of this critical metal.

Humble Oil Company originally investigated this property for its iron potential, after identifying an extremely strong magnetic signature over a four-square-mile area there. This anomaly identified a large mafic and ultramafic – igneous rocks rich in magnesium and iron – body buried about 25 to 40 meters below the surface.

Humble drilled 16 holes into this iron- and titanium-rich body, some going as deep as 600 meters.

Based on this initial work, it was estimated that the Kemuk prospect hosted 2.4 billion tons of material averaging 15 to 17 percent iron, along with titanium and silicon.

A beneficiation test in the 1960s indicates the feasibility of producing a concentrate containing 65 percent iron, 2 to 3 percent titanium dioxide, and 2 to 3 percent silicon dioxide.

This project was revisited by Millrock Resources Inc. in 2010. The company, however, was less interested in the titanium and iron than the potentially even larger porphyry copper-deposit might represent.

Core from Humble's 1950s drilling – now stored at the Alaska Geological Materials Center in Anchorage – provided Millrock geologists with a peek at what lies below the surface at Kemuk.

The Millrock team postulated that Kemuk could be analogous to a similar igneous body lying next to the enormous Pebble porphyry copper-gold-molybdenum project about 100 miles to the east.

Millrock Chief Exploration Officer Phil St. George was the first to recognize the porphyry potential at Pebble and is very familiar with the mineralization found there.

Staking a block of state mining claims covering Kemuk and the surrounding lands, Millrock began investigating the potential of this property it called Humble.

Kinross Gold Corp. funded a 2011 drill program carried out by Millrock to investigate a theory that a Pebble-like deposit lies next to Kemuk. Due to tough drilling conditions, however, this theory was not fully tested.

While it is unclear whether a porphyry copper-gold deposit on the scale of Pebble is hidden near Kemuk, the large body of iron-titanium mineralization already identified there is an indication of Alaska's latent potential to be a domestic source of titanium and other metals and minerals critical to the United States.

Author Bio

Shane Lasley, Publisher

Author photo

Over his more than 16 years of covering mining and mineral exploration, Shane has become renowned for his ability to report on the sector in a way that is technically sound enough to inform industry insiders while being easy to understand by a wider audience.


Reader Comments(0)